---
title: "Raw Data Files"
slug: "raw-data-files-execution-mode"
updated: 2026-09-09T13:56:54Z
published: 2026-09-09T13:56:54Z
canonical: "docs.discngine.com/raw-data-files-execution-mode"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.discngine.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Raw Data Files

This step is used to check the accuracy of the data loaded in the previous step.

The following details about the data and configuration selected in the run design are displayed:

- The measurement mode (`Sequential` or `Alternate`)
- The number of virtual plates (total measurements in your run) and physical plates (number of plates in your run)
- The readouts selected and their aliases
- The readout transformations (deprecated): basic calculations on the readouts

![Raw Data File](https://cdn.document360.io/dde9293e-c107-4b3e-9774-9c9c296ed970/Images/Setting/assay-exec-raw-data-files.png?sv=2026-02-06&spr=https&st=2026-11-10T22%3A27%3A50Z&se=2026-11-10T23%3A27%3A50Z&sr=c&sp=r&sig=%2F%2FwrEc%2BK4Vos37dNHIr0j2Tp706mtNTSjXXw8vCx%2FCc%3D)

- If information is missing, alert messages will be displayed, and the `Missing Readouts` section will not be empty.

              
              

For more information about measurement mode, virtual and physical plates, and readout transformations, see the [Designer documentation on Raw Data Files](/public/docs/raw-data-files-overview).

## Next Step

              
              

Continue the run design by proceeding to the next step: [Plate Mapping step](/public/docs/plate-mapping-execution-mode).