---
title: "Well Validation (Execution Mode)"
slug: "well-validation-execution-mode"
updated: 2026-09-09T13:57:39Z
published: 2026-09-09T13:57:39Z
canonical: "docs.discngine.com/well-validation-execution-mode"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.discngine.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Well Validation (Execution Mode)

This step allows you to visualize raw data and perform a quality check of the analysis.

![Well validation home](https://cdn.document360.io/dde9293e-c107-4b3e-9774-9c9c296ed970/Images/Setting/assay-exec-well-validation-invalidate.png?sv=2026-02-06&spr=https&st=2026-11-10T23%3A52%3A38Z&se=2026-11-11T00%3A52%3A38Z&sr=c&sp=r&sig=mXGGyk6WLOymTnLiNyd9kqOAaXVP61LSQ0TcgBbJnoY%3D)

              
              

Spotfire is primarily used as a visualization tool in the application. When accessing the page, you may be prompted to log in to Spotfire. Click the `Log In` button and use the corporate button for automatic authentication. You should not be prompted again.

## From the Run Template

Before accessing this page, some information is pre-calculated using the run template configuration:

- The normalizations used:
  - Calculations are performed on your readouts.
  - Data may be added to plates or wells.
- The automatic analysis:
  - Some wells may be automatically invalidated if the designer defined such rules.
- The annotation types:
  - Annotation types may be added to wells or plates, allowing you to add extra values.

              
              

For more information on calculations added by the designer, click the `See` buttons in the left panel under the `Run Details` section.

## Validation, Invalidation, and Revalidation

By selecting your data and using the buttons in the top bar, you can invalidate aberrant wells. For instructions, see the [How To: Validate or Invalidate Data guide](/public/docs/validate-or-invalidate-data).

## Visualization Template Options

The default visualization template is defined by the designer.

- Switch templates by clicking the gear icon in the top right.
- Hide the left panel by clicking the eye icon.
- Use fullscreen mode by clicking the fullscreen icon in the region's top right.

For more details, see [How To: Visualize Data and Change Template](/public/docs/visualize-my-data-and-change-template).

## Annotations

You can add extra values to wells or plates using annotation values in the left panel, if defined in the run template.

See [How To: Add Annotation Values or Comments](/public/docs/add-annotation-values) for instructions.

## Next Step

              
              

Continue the design of the run by going to the next step: [Reference Analysis step](/public/docs/reference-analysis-execution-mode).

If you don't have any reference well defined, you will not be able to access the sample analysis page. You can go directly to the step [Sample Mapping](/public/docs/sample-mapping-execution-mode).

![Next steps](https://cdn.document360.io/dde9293e-c107-4b3e-9774-9c9c296ed970/Images/Setting/assay-exec-well-validation-next-steps.png?sv=2026-02-06&spr=https&st=2026-11-10T23%3A52%3A38Z&se=2026-11-11T00%3A52%3A38Z&sr=c&sp=r&sig=mXGGyk6WLOymTnLiNyd9kqOAaXVP61LSQ0TcgBbJnoY%3D)